35 Executioner
149,900 for a limited time

More than 20 years ago Reggie Fountain started it all with the 10 Meter Executioner. Now, we’ve brought back this timeless classic and equipped it for modern times. Each 35 Executioner comes with a stylish color coordinated dash with bezels, throttles and matching wheel. Embroidery adorns the seatbacks and a custom X logo is inlaid on the engine hatch. Custom graphics accent the Executioner’s exterior and a stainless steel rub rail insert gives it an added touch of elegance. Powered with twin Mercury 496 HO’s the Executioner runs an astonishing 75+ mph with incredible low end pulling power and mid range throttle response. The spacious cabin includes a V-berth, which sleeps two, facing cabin sofas, enclosed head and a galley with cooler and pressurized sink. So if you’re in the market for the most incredible value in the marketplace, choose the fastest, safest, smoothest, best handling and most dependable boat in the world.

This timeless Legend is definitely a favorite for all ages. The design has evolved over the years and originates from the 10M Executioner, the boat that started it all. The low profile plexiglass windshield, Fountain’s signature bow profile, with custom graphics, exclusive to the Executioner, makes this boat special. The color-coordinated dash adds that special touch. The hull integrates our positive lift, notched transom pad keel designs. Powered with twin Mercury 496 HO’s, the Executioner runs an astonishing 75+ mph.

Reggie Fountain
“The 35 Executioner is definitely a favorite of mine. It was the design that started it all and I personally spent thousands of hours perfecting the design. The performance is astonishing and it is a boat that I'm sure you'll enjoy."
 

TWIN ENGINE

LOA: 35' / 10.67 m
Beam: 8'6" / 2.6 m
Weight: 8,000 lbs. / 3,629 kgs
Fuel capacity: 160 gals. / 605 L
Recommended power: Twin 496 HO Mercury’s with Bravo One drives - 75+ MPH

Standard Equipment

  • Batteries, twin, heavy duty/jumper cables and receptacle
  • Battery switches, two, parallel, explosion proof
  • Bilge pumps, two, 12 volt DC, 1200 GPH automatic/manual pump
  • Bolster seats, split w/hydraulic drop seats
  • Cabin lighting
  • Carpeting, cockpit, customized w/embroidered "Fountain" logo
  • Cockpit cover, form fitted
  • Color co-coordinated dash
  • Compass, electronic digital
  • Embroidered seatbacks
  • Engine compartment w/lighting and motorized hatch
  • Engine mounts, heavy duty plate
  • Fire extinguisher, automatic
  • Fuel filters, two w/water separators
  • Fuel tanks, heavy duty, baffled, 3/16" thick aluminum; foamed, glassed & bolted in position w/stainless steel pickups, 160 gal. total capacity
  • Galley w/sink and cold water pressure system
  • Hand laid composite hull and deck manufactured w/multi-directional fiberglass w/high density coring and vinylester resin and w/hull and deck laminated, pop riveted, thru-bolted, screwed, and sealed together w/heavy duty marine sealant/adhesive
  • Head, enclosed w/porta-potti
  • Horns, electric
  • Hour meter
  • Ice chest, built-in, insulated
  • Instrumentation, heavy duty Gaffrig w/integrated warning lights
  • Positive Lift Hull, Single Step
  • Propellers, stainless steel to match engine and drive package
  • Rails, bow and stern, 316L stainless steel, thru-bolted
  • Standard graphic selections
  • Steering, heavy duty hydraulic, offshore hi-performance type w/dual pumps
  • Stereo, marine AM/FM CD w/four marine speakers
  • Sun deck, upholstered over engine hatch
  • Tie Bar, external
  • Trim indicators, mechanical for drives and tabs
  • Trim switch on throttles
  • Trim tabs, Bennett dual ram
  • Windshield, tinted
  • X Logo inlaid in engine hatch

Call 603-293-7200